• MA: Direct thermal decomposition mercury analyzer
  • PE: Fully automated petro-pyrolysis mercury analyzer
  • RA: Reducing-vaporization mercury analyzer
  • RA-4500
  • RA-4300
  • RA-4300FG+
  • RA-5
  • WA: Atmospheric mercury analyzer
  • EMP: Portable mercury survey meter
  • Continuous mercury monitor

[Proffessional point of view] How to select the best mercury analyzer?
[select application/method to] Search the best mercury analyzer

Fully automated reducing-vaporization mercury analyzer

RA-4500

Revolutionizing mercury analisis by CVAAS to include fully automated sample digestion and analysis

Contact

RA-4500

Up to 50% cost reduction

The RA-4500 is the highest grade model of our reducing-vaporization mercury analyzer, which was developed to meet customer’s needs for “more efficient measuring methods in compliance with various testing methods without troublesome wet pretreatment.”

For the first time ever, measuring steps from pretreatment through to measurement of liquid samples, such as tap water, industrial waste water and soil eluate, are fully automated. The required amount of sample is as small as 5 mL, and reagents as well as waste fluid can be significantly reduced. Thus, compared to previous methods, operation cost can be reduced by up to 50%.

RA-4500

In mercury measurements, the process that affects measurement accuracy most is the sample wet pretreatment step. However, the following points must be cleared:

  • Decomposition of substances that are difficult to decompose and determination of the end point
  • Adsorption and volatilization of mercury during wet pretreatment
  • Contamination from reagents and vessels
  • Handling of hazardous reagents and disposal of waste fluid
  • Health and safety management during long time work, experience, skills, safety education, etc.

The RA-4500 solves all of these issues.

Fully automated max.10 wet pre-treatment steps

In the RA-4500, the 10 wet pretreatment steps including the reagent (such as sulfuric acid) addition, heating/cooling, and the residual potassium permanganate checking are fully automated. Atomic mercury can be subjected to wet pretreatment, vaporized by the bubbler and then measured by cold-vapor atomic absorption spectroscopy with the highest level of sensitivity and accuracy in this class.

The RA-4500 allows for measurements in accordance with standards and regulations such as Ministry of Health, Labor, and Welfare Notification no. 261; Testing Methods for Industrial Wastewater (JIS K 0102); Environment Agency Notification no. 59; and Soil Contamination Countermeasures Act (Environment Agency Notification no. 46), and offers software that conforms to the revised Waterworks Act, which increases convenience.

In addition to the basic functions of the previous model, this equipment adopts newly developed technology, which, thus, adds new functions to the previous model.

  • Daily inspection that can check the equipment stability is automated.
  • A noncontact sensor ensures the detection of undecomposed samples, and potassium permanganate color can be accurately determined.*1
  • A new heating method using an infrared heater, and equipment construction with integrated exhaust duct & drip-proof enclosure
  • The peak for mercury and the peak for other substances are automatically identified.
  • Recording of measurement history in compliance with Ministry of Health, Labor, and Welfare Notification no. 261

*1: These are auxiliary functions, so please make the final check by yourself.

RA-4500

Specfications

Sample treatment sectionNumber of sample80
Drive systemTurn table system
Heating methodInfra-red radiation heater
Sample trayAcid-resistant Aluminum
Heating temperature95±5°C (within 90min)
Cooling methodCooling fan (Room temperature-10°C)
Stirring methodMagnetic stirrer
Sensor for “with/without sample and KmnO4 color” *1Photo sensor
Sample container Glass (50pcs) *Disposable tube is also available
BubblerReagent-resistance resin bubbler
Reagent dispenser sectionDispensingDelivered with a tube pump
Dispensing volumeAdjustable
Dispensed reagentsSulfuric acid, Nitric acid, Potassium permanganate solution, Peroxide potassium disulfate solution, Hydroxylamine hydrochloride solution, Tin (II) chloride solution, Distilled water
Mercury detecting sectionMeasurement principleNon-dispersive double-beam cold vapor atomic absorption
Measurement methodReducing vaporization with open air-supply (Peak height measuring and integration measuring selectable)
Light sourceLow pressure mercury discharge lamp
Wave length253.7nm
DetectorPhoto-tube
Detection limit 0.0025ng/5mL (0.5ppt)
*5ppt in case of including chemical treatment
Maximum range500ng/5mL (100 ppb)
Measuring time 120sec~300sec
Mercury removalAbsorption by activated carbon
Body caseSafety systemLock system (Running)
Exhaust capacity1.6~1.8m3/min (Sirocco fan)
Data processing system
(PC-Win/RA-4500)
OSWindows 7
CommunicationEthernet (One-to-one for RA-4500, not for in-house LAN)
DisplayPeak wave shape, Calibration curve, Measuring time and Measuring result
Control softwareStart/stop measuring: Controllable
Pretreatment conditions: Heating conditions setup (Heating temperature, heating time), Reagent dispensing volume setup
Data processing softwareSelectable from 6 formulas (3 linear and 3 3rd Order fits), Correlation Coefficient is automatically calculated.
Statistic calculation: Mean value, Standard deviation, Coefficient of variation (All values are automatically calculated.)
PrintMeasuring conditions, Calibration curve, Measured values, Statistical calculations, Peak wave shape and Measuring time
Quality controlCheck standard, Avoid abnormally high mercury etc.
Installation requirementsInstallation dimensions580W x 650D x 619H (mm)
Weight42kg
Power supply (1) AC 100, 220~240V 50/60Hz
(2) Voltage variation: within ±5%
(3) Power capacity: 1.5kVA (Excluding PC and printer)
(4) Power quality: Non surging, no high-frequency waves, and noiseless.
(5) Distance from power supply: 2m or less
(6) Ground-fault circuit interrupter: 15mA
(7) Grounding: Grounding terminal with ground resistance of 100Ω or less

*1: These are auxiliary functions, so please make the final check by yourself.

Applications, Test methods

The RA-4500 measurement technique is suitable for a wide variety of aqueous samples, including drinking waters, industrial wastewaters, river waters, lake waters, seawaters, rain-runoff, and more.

Option

No special options available.

^
^
 
Page Top